Cordless Drill Kits for Home DIY

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases.

A cordless drill kit should be judged by the exact package, not just the voltage printed on its box. Battery count, chuck size, speed control and included bits determine what you can do on day one. We compared manufacturer documents for three exact kits. HandyTested has not drilled test holes, driven screws or measured torque, runtime or durability with these products.

Quick comparison

Exact kit	Drill and chuck	Documented package	Useful distinction
DEWALT DCD771C2	DCD771, 1/2-inch ratcheting chuck	Two batteries, charger and bag	Two-speed 0-450/0-1500 RPM gearbox
BLACK+DECKER BDC120VA100	LD120 with keyless chuck	One battery, charger, case and 100-piece assortment	24-position clutch and broad starter bit set
CRAFTSMAN CMCD700C1	CMCD700, 1/2-inch keyless chuck	One V20 battery and charger	Two-speed 0-350/0-1500 RPM gearbox and LED

These are manufacturer-stated package and no-load speed figures, not measured drilling performance. Kit prices vary, so this guide does not promise a fixed under-$100 ceiling. Compare the exact suffix, current contents and seller before ordering.

DEWALT DCD771C2: two-battery kit

DEWALT’s DCD771C2 includes its DCD771 1/2-inch drill/driver, two 20V MAX batteries, a charger and a contractor bag. The product page lists a two-speed transmission at 0-450 and 0-1500 RPM and a ratcheting chuck. A second battery can be useful when one needs charging, but the listing does not prove a specific number of work hours in your project.

Check before buying: DCD771C2 is a kit, not the similarly named DCD777 bare tool or a drill/impact combo. DEWALT’s page mixes details from product variants, so inspect the supplied manual and included battery labels rather than assuming motor type or capacity from a related listing.

Check DEWALT DCD771C2 listings on Amazon → (paid link) (verify two batteries and charger).

BLACK+DECKER BDC120VA100: starter accessories

BLACK+DECKER’s BDC120VA100 package combines the LD120 drill/driver with one POWERCONNECT battery, a charger, storage case and a 100-piece accessory assortment. The manufacturer lists a 24-position clutch for setting screw-driving force. This package emphasizes common starter bits and accessories rather than a second battery.

Check before buying: the model number identifies the complete kit, not every LD120 or LD120VA offer. Count and inspect the bits you actually need; an accessory count alone says nothing about bit life, material compatibility or drilling capacity.

Check BLACK+DECKER BDC120VA100 listings on Amazon → (paid link) (verify kit contents).

CRAFTSMAN CMCD700C1: V20 drill/driver kit

CRAFTSMAN’s CMCD700C1 includes the CMCD700 1/2-inch drill/driver, a V20 battery, charger and double-sided bit. It lists a two-speed 0-350/0-1500 RPM gearbox, keyless chuck and work light. This is a drill/driver kit, not a hammer drill or impact-driver bundle.

Package discrepancy: the current product title names a 1.5Ah battery, while the same page’s Includes section lists 1.3Ah. Verify the battery label in the exact offer; we do not assume either capacity is universal.

Check CRAFTSMAN CMCD700C1 listings on Amazon → (paid link) (verify battery and charger).

How to choose

Choose the package: a second battery, starter accessory set or V20 platform has different value depending on what you already own.
Match the bit and material: use a properly rated bit for wood, metal or masonry; these ordinary drill/drivers are not a substitute for a hammer drill in demanding masonry.
Use the clutch: start with a lower setting for screws, then adjust to reduce stripping or overdriving. Drill mode is for boring with an appropriate bit.
Compare batteries by exact label: maximum 20V naming does not specify usable runtime. Capacity, load, bit and material matter.

Safe setup

Check for hidden wiring and pipes before drilling, secure the workpiece, wear eye protection and keep hands clear of the rotating bit. Remove the battery before changing bits or making adjustments. Follow the exact manual for charging, storage, bit limits and any material-specific protection. A stud finder can help locate framing, but cannot certify that a wall cavity is clear of utilities.

Frequently asked questions

Is an impact driver included?

No. These three exact packages are drill/driver kits. Check for a separate impact driver if that task calls for one.

Are the three batteries interchangeable?

No. DEWALT, BLACK+DECKER POWERCONNECT and CRAFTSMAN V20 are separate battery systems.

Were these drills tested by HandyTested?

No. This comparison uses manufacturer product pages and the DEWALT manual, not first-hand performance testing.